Guest Wifi Network; Turn The Guest Wifi Network On And Off; Guest Wifi Password - NETGEAR Fuse User Manual

1. Click WPS button pairing.
2. Within 2 minutes, press the WPS button on the wireless device you want to connect or select the
WPS-related option in your device's software.
– or –
If the WiFi device has a PIN associated with it:
1. Find out the PIN for the WiFi device you are adding. To do this, use the PIN option in your
device's software. Alternatively, use the WiFi Protected Setup Wizard that may be available,
depending on the manufacturer of your device.
2. In the Web page, click Enter WPS PIN.
3. Enter your device's PIN.
4. Click Submit.
Your NETGEAR Fuse Mobile Hotspot and the wireless device will communicate and establish the
connection. If no problems are encountered, the message "The device can now access your
hotspot" displays. If your device does not connect, the message "No devices were connected ..."
displays. Try to connect it manually. (See Find and Select the Mobile Hotspot WiFi Network.)
Note: If you want to stop the pairing process, click Cancel.

Guest WiFi Network

Your NETGEAR Fuse Mobile Hotspot lets you create a separate Guest WiFi network that you can
share with temporary users.
Devices on the Guest WiFi network:
Cannot access devices that are on the Main WiFi network (such as printers or other computers).
n
Cannot use the Mobile Hotspot Manager to change any device settings.
n

Turn the Guest WiFi Network On and Off

You can turn on the Guest WiFi network from the Mobile Hotspot Manager's WiFi page.
1. Log in to the home page. (See Log In to the Mobile Hotspot Manager.)
2. Click WiFi.
3. In the Guest WiFi area, click Turn On or Turn Off.

Guest WiFi Password

You can set the hotspot to use the same Guest WiFi password all the time, or for greater security,
you can have it generate a random password each time the Guest WiFi network is turned on.
Connect with WiFi (WLAN) 15