Using Bi-Admin - Linksys Instant EtherFast EPSX3 User Manual

Instant etherfast series ver. 2 etherfast 10/100 1/3-port printserver
Hide thumbs Also See for Instant EtherFast EPSX3:
Table of Contents

Advertisement

2. When you see the screen shown in Figure
6-1, click the OK button.
3. When the Bi-Admin program appears, it will automatically scan the net-
work for available Linksys PrintServer hardware. Any hardware found on
the network will appear in the Default Name, Device Name, and Printer
Port categories on the right hand side of window. Default Name is the SC
number located on the back or bottom of the PrintServer unit, and cannot
be changed.
4. When any change or operation is executed, you will be prompted for a pass-
word. Enter your password, making sure to use the same case (i.e. upper or
lower) that you used when creating the password, and press the Enter key.
If no password was created, press the Enter key.
"Device name" is a nickname that you can give the PrintServer to make it more
user-friendly for users on the network. It can be changed with Bi-Admin by
clicking the Configuration button and selecting System.
"Printer Port" displays the model of the PrintServer that you are using.
Note: Sometimes the PrintServer's Error or Status LED may
light up or flicker as it accepts your configuration changes. This
is normal.
Bi-Admin Help Files
The Help files for the Bi-Admin program can be accessed by clicking the Help
button in the Menu bar. These help files offer extensive advice and details
about all of your PrintServer's functions and capabilities.
16
Instant EtherFast
Figure 6-1
Figure 6-2
EtherFast 10/100 PrintServers
®
Series

Using Bi-Admin

Using Bi-Admin
Obtaining Device Information:
To access information about your PrintServer, either click
on it in the Device List window (on the right side of the Bi-
Admin window) or highlight the PrintServer and click on
the Device Information icon, shown here. You can also
highlight the PrintServer and then click on Status to select
Device Information. The Bi-Admin program displays the
PrintServer's information, in the following format, in a read-only window:
SCA71107 LaserWriter
The Device Information Icon
0620103428
6010
005F
SCA71107
SCA71107
N/A
DD319022
02000100
DD319023
AA0000AA
192.168.1.78
192.168.1.254
255.255.255.0
0.0.0.0
N/A
N/A
WORKGROUP
Figure 6-3
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Instant etherfast ppsx1

Table of Contents