Linksys Instant EtherFast EPSX3 User Manual page 10

7. The Printer Port Setup screen will display the PrintServer and all of the
printers with which it communicates. Here, you have the option of installing
the printer by highlighting its description and clicking the Next button. You
can also close this screen by clicking the Close button.
8. This will display the Configure Printer Port screen. Any installed printers
will be displayed in the Existing Printers field. To connect a printer, select
the printer from this field, and click the Connect button. You can install a
printer by clicking the Add New Printer button.
12
Instant EtherFast
Figure 5-7
Figure 5-8
Series EtherFast 10/100 PrintServers
®
9. The Add Printer Wizard screen will come up at this point. Follow the stan-
dard procedure for adding printers under Windows. If you have any ques-
tions on adding printers, please refer to your printer's documentation.
10. After your printer(s) have been added, you will return to the Configure
Printer Port screen. Click the Connect button to connect the printer(s).
Figure 5-9
Figure 5-10
13