Connection Instructions; Figure 4-2: Connect A Pc; Figure 4-3: Connect A Telephone; Figure 4-4: Connect The Cable/Dsl Modem - Linksys WRT54GP2 User Manual

Wireless-G Broadband Router with 2 Phone Ports

Connection Instructions

1. Before you begin, make sure that all of your hardware is powered off, including the Router, PCs, switches, and
cable or DSL modem.
2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router.
Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, or switch.
Repeat this step to connect more PCs or other network devices to the Router.
3. If necessary, disconnect the RJ-11 telephone cable of your telephone from the telephone wall jack. Then
connect that end to the Router's Phone1 port.
NOTE: Make sure your telephone is set to its tone setting (not pulse).
4. If you have a second babyTEL phone line, repeat step 3 to connect a telephone or fax machine to the Router's
Phone2 port.
5. Connect your cable or DSL modem's Ethernet cable to the Router's Internet port.
6. Power on the cable or DSL modem.
7. Connect the included power adapter to the Router's Power port, and then plug the power adapter into an
electrical outlet.
The Power LED on the front panel will light up as soon as the power adapter is connected properly.
8. Power on your PC(s).
Proceed to "Chapter 5: Configuring the Router."
Chapter 4: Connecting the Wireless-G Broadband Router with 2 Phone Ports
Connection Instructions

Figure 4-2: Connect a PC

Figure 4-3: Connect a Telephone

Figure 4-4: Connect the Cable/DSL Modem

Figure 4-5: Connect the Power

9