Linksys WRT54GP2A-AT Quick Installation

®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-G Broadband Router with 2 Phone Ports
• Setup CD with User Guide
• Norton Internet Security on CD-ROM
• Quick Installation
• Network Cable
• Power Adapter
• Registration Card
• AT&T CallVantage sm Documents
2.4 GHz
Wireless-G
802.11g
Broadband Router
Wireless with 2 Phone Ports Quick Installation
Model No.
WRT54GP2A-AT
Model No.
There are two ways to configure the Router. Choose one of the following:
• Run the Setup CD-ROM - It is strongly recommended that you use the
Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and
follow the on-screen instructions.
• Use this Quick Installation guide - If you wish, you can use the Router's
Web-based Utility. Proceed to Step 1 of this Quick Installation.
1
Connect the Router
A
Make sure that all of your
hardware is powered off,
including the Router, PCs, and
cable or DSL modem.
B
Connect one end of an
Ethernet network cable to one
of the numbered ports on the
back of the Router. Connect
the other end to an Ethernet
port on a network device, e.g.,
B
a PC, print server, or switch.
Repeat this step to connect
more PCs or other network
devices to the Router.
C
Plug a standard telephone into
the Router's Phone1 port.
C
NOTE: Make sure your telephone
is set to its tone setting (not
pulse).
D
Connect your cable or DSL
modem's Ethernet cable to the
Router's Internet port.
E
Power on the cable or DSL
modem.
D
F
Connect the included power
adapter to the Router's Power
port, and then plug the power
adapter into an electrical
outlet.
F
The Power LED on the front
panel will start flashing as soon
as the power adapter is
connected properly. This LED
will continue to flash while the
Router is booting up.
G
When the Power LED stops
flashing and is solidly lit, power
on the PC you wish to use to
configure the Router.
2
Configure the Broadband Router
In Step 2, you will need the setup
NOTE: Make sure your PC's
instructions provided by your high-
Ethernet adapter is set to obtain
speed Internet service provider. If
an IP address automatically. For
you do not have this information,
more information, refer to
then contact your high-speed
Internet service provider before Windows Help.
proceeding.
A
Open your PC's web browser.
Enter http://192.168.15.1 (the
Router's default local IP
A
address) in the web browser's
Address field. Then press the
Enter key.
B
A screen will appear and ask
you for a User Name and
Password. Leave the User
Name field blank, and enter
admin (the default) in the
Password field. (Later you
should set a new password
using the Administration tab's
B
Management screen. This will
help secure access to the
Web-based Utility.)
Then click OK.
C
The Router's Web-based Utility
will appear with the Basic Setup
screen showing.
D
Four types are offered for the
Internet Connection Type
setting. Depending on which
you select, the features
available on the Basic Setup
screen will differ. Proceed to
the instructions for your
connection type.
C