Kenwood KVT-7012BT Instruction Manual page 60

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting microphone for Bluetooth
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix it on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
60
• You can also install the microphone on the sun
visor in the car by changing the adhesive tape
attachment to the clip attachment (supplied).
Removing the trim plate
1
Use the extraction key (9) to lever out the
four tabs (two on the upper part, two on
the lower part).
9
2
Pull the trim plate forward.
7