Discs; Playing A Disc; Playback Operations - Kenwood KVT-7012BT Instruction Manual

DISCS

DISCS

Playing a disc

• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 62.
Inserting a disc
Insert a disc with the label side facing up.
The source changes to "DISC" and playback starts.
• The IN indicator lights up while a disc is inserted.
• If " " appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing "
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
10
Ejecting a disc
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
60 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
,"

Playback operations

When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 46.
Indications and buttons on the source
control screen
For video playback
1 2
4 5 6
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Current playback item information (title no./
chapter no./folder no./file no./track no.)
3 Playing time
4 Playback mode (Page 13)
5 File type
6 IN indicator
3