Reader Parameters - Symbol MC9000-G Product Reference Manual

3-20 MC9000-G for Embedded Windows® CE .NET Product Reference Guide

Reader Parameters

Use the Reader Parameters window to set the scanning read parameters.
1. Double-tap Ctl Panel icon - double-tap Scanner Settings - double-tap Reader Parameters.
The Reader Parameters window appears.
2. To change any item in the Reader Parameters column, use the up
to select the item.
3. Use the left
Reader Parameter value options.

Reader Parameters

Reader Type
Aim Type
Aim Duration
Aim Mode
Beam Width
Raster Mode
Beam Timer
Control LED
Figure 3-16. Reader Parameters Window
and right arrow buttons to increment the value.
Table 3-4. Reader Parameters
Laser
Trigger, Timed hold, Timed Release
0-60,000 in increments of 100
Dot, Slab, Reticle, None
Normal, Narrow
Smart, Cyclone, None, Always Open,
0-60,000 in increments of 100
False, True
and down
Table 3-4
Values
arrows
list the