Mobile Computer Charging Procedures - Symbol MC9000-G Product Reference Manual

1-10 MC9000-G for Embedded Windows® CE .NET Product Reference Guide
• Chargers: The mobile computer's spare battery charging accessories are used to charge
batteries that are removed from the mobile computer. For detailed spare battery charging
accessories setup and charging procedures see:
• Single Slot Serial/USB Cradle on
• Four Slot Spare Battery Charger on
• Universal Battery Charger (UBC) Adapter on

Mobile Computer Charging Procedures

The mobile computer main and backup batteries can be charged using a cradle, the CAM or the MSR.
The CAM and the MSR also require a charging cable and a Symbol approved power supply.
1. Connect the charging accessory to the appropriate power source, see
Accessories
2. Insert the mobile computer into a cradle or attach the appropriate snap-on module.
3. The mobile computer starts to charge automatically. The amber charge LED, in the Indicator
LED Bar, lights to show the charge status. See
The main battery usually fully charges in less than four hours.
LED
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber
for setup information.
Table 1-1. Mobile Computer LED Charge Indicators
Mobile computer not in cradle/CAM/MSR; mobile computer not placed correctly;
charger is not powered.
Error in charging; check placement of the mobile computer.
Mobile computer is charging.
Charging complete.
Note: When the battery is initially inserted in the mobile computer, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
page 7-8
page 7-16
page 7-26.
Table 1-1 for charging indications.
Indication
Chapter 7,