Getting Started; Changing The Volume - Siemens miniTek User Manual

Getting started

Before first use
• Charge miniTek before first use.
Charging
• Connect miniTek with the power plug to a power supply.
Charging is complete when the power LED shines green.
Power LED state
Battery full
miniTek off off
miniTek on flashes green
miniTek off/
green constantly
charging
miniTek on/
pulses green
charging
Turning off green / turns off
miniTek slowly
green for 3
Turning on
seconds, then
miniTek
flashes green
If you turn on miniTek and the battery is empty, the LED rapidly
flashes red for 3 seconds, then turns off.
12
Battery nearly empty
off
flashes red
red constantly
pulses red
red / turns off slowly
red for 3 seconds,
then flashes red
Wearing miniTek
• Wear miniTek no further than 60 cm (24 inches)
away from the hearing instruments.
• Use lanyard or clip to wear miniTek.
Turning the miniTek on/off
• Press for about 3 seconds to turn miniTek on.
All LEDs shine for 3 seconds, then only the power LED shines.
• Press for about 3 seconds to turn miniTek off.
All LEDs shine for 3 seconds, then turn off slowly.
Changing the hearing program
/
• Press to change the hearing program.
P
/
Each time you press the program button, your hearing
instruments switch to the next program, confirming each
/
change with an acoustic signal (this is an option).

Changing the volume

• Press to increase the volume.
• Press to decrease the volume.
/ /
13