Connecting Minitek Transmitter To Your Television - Siemens miniTek User Manual

• Press for about 3 seconds to turn the miniTek on.
• Use the on/off switch to turn the transmitter on.
• Use one of the supplied cables to connect the transmitter to
an external device (refer to graphic on previous page).
• Connect the transmitter with the power plug to a power
supply or charge the rechargeable battery regularly.
• Press on miniTek to change to the audio program (see
chapter "Getting Started" for information about the sequence
of external sources).
flashes while searching a connection to the transmitter
and shines constantly after it is established.
The LED on the transmitter confirms that the Bluetooth audio
link is established.
• Start the audio transmission on your device.
You can now hear the sound from your external device through
your hearing instruments.
You can use a second transmitter, which is available as an
accessory. This way the first transmitter can always remain
connected to your preferred device while the second
transmitter is connected with another device (e.g. a second TV
in your bedroom).
20
Connecting miniTek transmitter
to your television
RCA Stereo
Plugs
Transmitter
Transmitter
If your television does not have an analog output using the
RCA adapters, you may be able to use the analog outputs on
either your cable box, satellite dish console, or A/V receiver.
Additionally, a digital to analog converter can be obtained at an
electronics supply store.
2.5mm to 3.5mm
Stereo Plug
21