Charging The Tek Remote Control; Using The Tek Remote Control With A Phone - Siemens miniTek User Manual

Charging the Tek remote control

Charging process
• Connect the remote control with the power plug to a power
outlet. The charging process starts. Charging time is about 5
hours depending on the status of the rechargeable battery
(Fig.13).
Charging is complete when the battery symbol shows a full
battery (Fig.13).
Running time of the rechargeable battery
The running time of the rechargeable battery depends on the
way the remote control is used.
• The most battery-consuming function is the streaming
transmission of audio signals. This function is active when
using the telephone or listening to an external device.
The rechargeable battery will provide about 5 hours of use
time under these circumstances before requiring recharge.
• When no transmission of audio signal is active but a phone
has been paired, the rechargeable battery will last several
days before requiring recharge.
• When no transmission of audio signal is active and no
telephone has been paired, the rechargeable battery lasts
several months before requiring recharge.
• For prolonged operation, the Tek remote control may be used
while plugged in.
34
Using the Tek remote control
with a phone
Pairing Tek remote control and phone
Before you can use the Tek remote control with a phone for
the first time, you need to pair your phone and the Tek remote
control. The pairing process is like an "introduction" of phone
and remote control. After the pairing process the phone and
remote control "know" each other. The pairing process does not
need to be repeated.
• Activate the Bluetooth function in your phone.The display
of your phone should show a Bluetooth symbol when the
Bluetooth function is activated (see symbol Fig. 14).
• Press the green symbol on the remote control and hold
for about 7 seconds. The remote control changes to pairing
mode. You have 2 minutes to finish the pairing process.
• Search in the menu of your phone for other Bluetooth devices.
The Tek remote control allows you
to use your hearing instrument(s)
as a wireless headset when you are
using a Bluetooth compatible
phone or cell phone.
Instead of using the telephone
receiver, you should speak
into your remote control and
listen through your hearing
instrument(s).
35