Display Settings - Kenwood KDC-U463 Instruction Manual

AUDIO SETTINGS
TRE ADJUST TRE CTR FRQ
TRE LEVEL
PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/
USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use
the customized settings.)
[DRIVE EQ] is a preset equalizer that reduces noise outside the car or running
noise of the tyres.
BASS BOOST LV1/ LV2/ LV3 or LEVEL1/ LEVEL2/ LEVEL3: Selects your preferred bass boost
level. ; OFF: Cancels.
LOUDNESS LV1/ LV2 or LEVEL1/ LEVEL2: Selects your preferred low and high frequencies
boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Audio
signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the
subwoofer.
SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be
in line with the speaker output for optimum performance. (Selectable only if a
setting other than [THROUGH] is selected for [LPF SUBWOOFER].)
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Presets the volume adjustment
level of each source. (Before adjustment, select the source you want to adjust.)
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency components and
(Sound restoring the rise-time of the waveform that are lost in audio data compression. ;
reconstruction) OFF: Cancels.
• [SUB-W LEVEL]/ [SUBWOOFER SET]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only
if [SWITCH PREOUT] is set to [SUB-W] or [SUBWOOFER]. ( 4)
• [SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON].
10.0K/ 12.5K/ 15.0K/ 17.5K or 10.0KHZ/ 12.5KHZ/
15.0KHZ/ 17.5KHZ: Selects the center frequency.
–8 to +8 (0): Adjusts the level.

DISPLAY SETTINGS

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY], then press the
knob.
3 Turn the volume knob to make a selection (see the following
table), then press the knob.
4 Repeat step 3 until the desired item is selected/activated or
follow the instructions stated on the selected item.
5 Press and hold to exit.
To return to the previous setting item, press
COLOR VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*
1
SELECT* preferred key and display illumination color.
You can create your own color (when [CUSTOM R/G/B] or preset
2
colors* is selected). The color you have created can be stored in
[CUSTOM R/G/B].
1 Press and hold the volume knob to enter the detailed color
adjustment.
2 Press S / T to select the color (R/ G/ B) to adjust.
3 Turn the volume knob to adjust the level (0 — 9), then press
the knob.
DIMMER ON: Dims the display illumination (and button illumination*
OFF: Cancels.
BRIGHTNESS 0 — 31: Selects your preferred brightness level for display
illumination (and button illumination*
TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
* 1
For .
* 2
Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/
BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/
AQUA2/ GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/
YELLOW/ ORANGE1/ ORANGE2/ ORANGERED
.
Default: XX
2
: Selects your
1
). ;
1
).
11
ENGLISH