Display Settings - Kenwood KDC-BT370U Instruction Manual

Audio Settings
• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS],
select the speaker you want to adjust:
[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]
– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting
other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
• [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than
[NONE] is selected for [REAR] of [SPEAKER SIZE].
Determining the delay time automatically
26
ENGLISH
If you specify the distance from the currently set
listening position to every speaker, the delay time
will be automatically calculated.
1 Set [POSITION] and determine the listening
position as the reference point (the reference
point for [FRONT ALL] will be the center
between the right and left in the front seats).
2 Measure the distances from the reference point to
the speakers.
3 Calculate the distance between the furthest
speaker (subwoofer on the illustration) and other
speakers.
4 Sets the [DISTANCE] calculated in step 3 for
individual speakers.
5 Adjusts [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position.

Display Settings

Zone identification for brightness setting
Zone identification for color settings and brightness settings
Set the dimmer
Press and hold DISP (DIM) to turn on or off the dimmer.
• Once you press and hold this button, [DIMMER] setting (page 27) will be
overwritten.