System Diagrams - Alpine MRV-V500 Owner's Manual

SYSTEM DIAGRAMS

Front Speakers
Rear Speakers
Subwoofer
Head Unit, etc.
Front Output
TYPICAL SYSTEM CONNECTIONS
4 Speaker + 1 Subwoofer System (5-Channel Input)
Input Channel Selector Switch Setting
CH-3/4
3/4
Connecting to the Speaker Level Input System
1 For the "Speaker Level Input System" setting,
connecting the Remote Turn-On Lead is not
required due to the "REMOTE SENSING" function of
this product. However, the "REMOTE SENSING"
function may not work depending on the signal
source connected. In such a case, connect the
Remote Turn-On Lead to an incoming power
supply cord (accessory power) in the ACC position.
2 If connecting both Speaker Input Leads and RCA
Inputs at the same time, do not connect both
signals to the same input channel of the amplifier.
Instead, be sure to connect each pair of inputs to a
different Input channel pair.
example;
Speaker Input Leads:
FL/FR to CH1/CH2, RL/RR to CH3/CH4
RCA Inputs:
SUBWL/SUBWR to SUBWL/SUBWR
Rear Output
Subwoofer Output
RCA Extension Cable (Sold Separately)
Y-Adapter (Sold Separately)
SUB W.
SUB W.
White
White/Black
Gray
Gray/Black
FR Gray/Black RL Green
FR Gray RL Green/Black
FL White/Black RR Violet
FL White RR Violet/Black
Violet/Black
Violet
Green/Black
Green
Fig. 10
11
-EN