Kompernass WK 5 A1 Operating Instructions Manual page 68

♦ Then switch to the next field using the
buttons to set the minutes for the start of the active phase.
♦ Then switch to the next field using the
buttons to set the hour for the end of the active phase.
GB
♦ Then switch to the next field using the
buttons to set the minutes for the end of the active phase.
The settings made here apply every day. The camera will not record
any images outside of the active phase.
♦ Confirm your selection with the
button to close this sub-menu.
Time lapse
With this function the camera automatically takes pictures at an
adjustable interval. This is useful if you want to observe the blooming
of plants or the like, for example. After you confirm "On" with the
button, you can set the desired time interval in the menu that now
appears:
♦ Press the
interval.
♦ Now switch to the next field, "Min", using the
/
64
Notification: Motion
sensors deactivated
/ buttons to set the hour of the desired time
buttons to set the minutes of the desired time interval.
button. Afterwards, press the
Set time lapse
Sec
Hr
button. Press the
button. Press the
button. Press the
button. Press the
WK 5 A1
/
/
/