Figure 4-8: Voice - Line 1 Screen - Linksys SPA9000 User Manual

IP Telephony System
External Calls
For external calls, make sure you have an active Internet connection. Then configure the settings for your Internet
phone service account on the System.
1. Launch the web browser on the administration computer.
2. Enter <IP address of the System>/admin/voice/advanced in the Address field (use the static IP address
you previously assigned to the System). Then press the Enter key.
3. The Voice - Info screen will appear. Click the Line 1 tab.
4. On the Line 1 screen, enter the settings for your Internet phone service account.
Subscriber Information
User ID. Enter the user ID (also called the account number) supplied by your ITSP. Do not use any hyphens,
spaces, or other punctuation.
Password. Enter the case-sensitive password supplied by your ITSP.
Proxy and Registration
Proxy. Enter the proxy address supplied by your ITSP.
If your ITSP supplied additional settings, enter those as well. Refer to the instructions your ITSP gave you.
5. Click the Submit All Changes button to save your new settings.
6. The System will reboot itself. Then the Internet phones will reboot themselves.
7. The Voice - Info screen will appear. In the Line 1 Status section, make sure that the Registration Status says,
"Registered."
You are now ready to make your first external call. Use any phone connected to the System, and dial 9 first when
you make an external call with the default US dial plan.
You can use analog telephones to make external calls; however, you cannot receive calls on any analog
telephones unless you configure the appropriate settings. Refer to the Voice - FXS 1 section of "Chapter 6: Using
the Web-based Utility" for instructions.
Congratulations! Now you can make external calls using the System.
Chapter 4: Getting Started
Instructions for Installing the IP Telephony System
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
NOTE: If your Internet Telephony Service Provider
(ITSP) supplied the System, then it may be
pre-configured for you, and you do not need to
change any settings. Refer to the instructions
supplied by your ITSP for more information.

Figure 4-8: Voice - Line 1 Screen

NOTE: If you cannot make calls with the default
US dial plan, visit www.linksys.com/kb for
additional dial plans, or refer to "Appendix C: Dial
Plan and Auto-Attendant Scripting for Advanced
Users" to write your own script.
12