Chapter 4: Setting Up The Dual-Band Wireless A+G Notebook Adapter; Using The Setup Wizard; Figure 4-1: Setup Wizard's Welcome Screen; Figure 4-2: Setup Wizard's License Agreement - Linksys WPC55AG User Manual

Dual-Band Wireless A+G Notebook Adapter
Chapter 4: Setting up the Dual-Band Wireless A+G Notebook
Adapter
The Dual-Band Wireless A+G Notebook Adapter Setup Wizard will guide you through the installation procedure.
The Setup Wizard will install the driver and Wireless Network Monitor, as well as configure the Adapter.
NOTE: You must run the Setup Wizard before connecting the Adapter
to your computer.

Using the Setup Wizard

Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears,
enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
On the Welcome screen, you have the following choices:
Install - Click the Install button to begin the software installation process.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
1. To install the Adapter, click the Install button on the Welcome screen.
2. After reading the License Agreement, click the Next button if you agree, or click the Cancel button to end the
installation.

Chapter 4: Setting up the Dual-Band Wireless A+G Notebook Adapter

Using the Setup Wizard

Figure 4-1: Setup Wizard's Welcome Screen

Figure 4-2: Setup Wizard's License Agreement

7