Bajaj Pulsar 150 CC DTS-i User Manual page 7

Hide thumbs Also See for Pulsar 150 CC DTS-i:
Table of Contents

Advertisement

Location of Parts
BATTERY
Battery
It is located inside the 'Side Cover' LH.
Always maintain electrolyte level in each
cell between max and min level lines.
Always keep a watch on battery charge
level indicating icon, if it flashes (indicates
battery is in low charged condition), show
the vehicle to authorised BAL dealer.
TOOL KIT
Tool Kit Location
It is located below seat.
2 rubber straps are provided to hold the
tool kit.
CAUTION : Always fit tool kit with
rubber straps.
9
Location of Parts
A
Fig. B
A : Seat Release Cable
Removal of Seat
Remove 'Side Cover' LH.
Pull the 'Seat Release Cable' (A) to
release seat lock. Keeping cable pulled,
tap the center of seat, lift the seat from
rear end and slide it towards tail lamp to
remove seat.
3
1
4
2
Fig. C
Fitment of Seat
Match & insert the bracket ('1' of Fig. 'B')
of seat with slot ('2' of Fig. 'B') provided
below fuel tank rear mounting on chassis.
Push seat towards fuel tank and align
lock rod ('3' of Fig. 'C') & seat lock ('4' of
Fig. 'C'). Then press the seat in middle
from top to lock the seat.
10

Advertisement

Table of Contents
loading

Table of Contents