Open Source & Beta Operating Systems; Telephone Cabling - Linksys USB200HA User Manual

IPX/SPX-compatible protocol
Click the Add button. Choose Protocol and click the Add button. Select
Manufacturer and choose Microsoft. Under the Network Protocol box, high-
light IPX/SPX-compatible protocol. Click OK. Click OK again. The com-
puter will begin copying files to your system. When the installation is com-
plete, you will be asked if you want to reboot. Click Yes.
NetBEUI
Click the Add button. Select Protocol, then click Add. Under Manufacturer,
highlight Microsoft. Under Network Protocol, highlight NetBEUI. Click
OK, then OK again. The computer will begin copying files to your system.
When the installation is complete, you will be asked if you want to reboot.
Click Yes.
TCP/IP
Click the Add button. Select Protocol, then click Add. Under Manufacturer,
highlight Microsoft. Under Network Protocol, highlight TCP/IP. Click OK,
then click OK again. The computer will begin copying files to your system.
When the installation is complete, you will be asked if you want to reboot.
Click Yes.
34
Linksys HomeLink™ Series Phoneline 10M USB Network Adapter
Open Source and Beta Operating Systems
Linksys does not provide technical support for FreeBSD or other freeware
and open source operating systems. Although many Linksys products have
been proven to perform well under freeware and open source OSes, technical
support for setup and troubleshooting is not provided. For information on
where to find device drivers and setup instructions for freeware OSes, visit
the support pages and FAQ files on the Linksys website at www.linksys.com.
Linksys does not provide technical support for beta operating systems.

Telephone Cabling

The telephone cables you use can be either crossover or straight-through
cables. Standard telephone cables like the ones you use every day in your
home should do the job.
Phone cables have connectors at each end with RJ-11 tips, with four wires
inside.
35