Installing The Usb Network Adapter's Driver - Linksys USB200HA User Manual

6. If you want to assign access passwords, type the passwords into the
Password fields.
7. When you're done, click on the Apply button, followed by OK. Repeat
steps 1-7 for any drive or folder you want to share on the network.
You have successfully enabled File Sharing on your PC. Your selected
drives or folders can now be accessed by other network users. If a user
tries to access one of your password-protected drives or folders, he or she
will be asked for the appropriate Read-Only or Full-Access password.
Below are the instructions to share your PC's printer over the network.
Enabling Printer Sharing
1. Double-click on the My Computer icon.
2. Double-click the Printers folder. A window of available printers will
appear.
3. Right-click on the printer that you want to share with other users. Click on
Sharing, then the Sharing tab.
4. Click on Share As. In the Share Name field, name the printer you want to
share. If you want to assign a password to the printer so that only certain
users can access it, type a password in the Password field.
5. Click on the Apply button, then OK. Your printer(s) are now shared.
N N o o t t e e : : Some printers cannot be shared on the network. Others may require
special instructions. Refer to your printer's user guide or contact your printer
manufacturer if you think this may be the case with your printer.
The Printer Sharing setup and installation is complete. Your printer can
now be accessed by other network users. The printer's driver may have to
be installed on other PCs. Consult your printer's documentation.
18
Linksys HomeLink™ Series Phoneline 10M USB Network Adapter
Windows 2000 Driver Installation
Overview
After installing the Phoneline 10M USB Network Adapter on your PC, follow
these instructions to install the HomeLink Windows 2000 driver. The installa-
tion procedure for the network driver could vary slightly depending on which
version of Windows 2000 you are using, and on your current system configu-
ration. If you encounter problems during the installation, see the
Troubleshooting section on page 22.
Installing the Network Adapter's Driver
1. Start your PC in Windows 2000, if you haven't already.
2. Windows will display the Welcome to the Found New Hardware Wizard
window. Click Next.
19