Troubleshooting - Linksys USB200HA User Manual

Troubleshooting

1. Windows doesn't detect new hardware when the HomeLink Adapter hardware
is installed, or it continues to detect the adapter each time I restart the PC.
• You may not have installed the adapter correctly or securely into the
appropriate port of your PC. Check that the adapter is securely inserted
into the appropriate port.
• The system BIOS may not be USB-compatible, your PC's USB settings
may be disabled, or the motherboard may have USB options not support-
ed by Windows 98 or Windows 2000. If you are not sure, contact your
PC's manufacturer.
2. Windows can't locate the driver for the HomeLink Adapter device.
• You may have inserted the wrong disk into your PC's disk drive.
• The disk may be defective, files may be missing, or you may be pointing
Windows to the wrong directory or drive.
• You can download the correct driver from our website www.linksys.com.
3. The Windows Logon screen does not appear after I restart my PC.
• Click on Start, then Log Off. Log back in. If this doesn't solve the prob-
lem, your PC's manufacturer may have disabled Windows' networking.
Contact your computer's manufacturer for help. If using Windows 2000,
refer to your Microsoft documentation.
4. On the Access Control Tab, User Level Access is selected, but Shared Level
Access is grayed out and not accessible.
• You previously had your primary network logon set to Client for NetWare
Networks. On the Configuration tab of the Network Properties window,
make sure that your primary network logon is set to Client for Microsoft
Networks.
• Your personal web server PC or Microsoft Front Page may require you to
choose a user level for security reasons.
5. In Network Neighborhood, I can only see my own PC and no other PCs on
the network.
• Make sure that the cables are connected correctly. Make sure your Link
and TX LEDs on your HomeLink Adapter are lit up. Swap your cable for
a new cable that you know is working.
• Verify that the HomeLink Adapter's Phoneline configuration is set to
Auto Configuration.
22
Linksys HomeLink™ Series Phoneline 10M USB Network Adapter
• Try connecting your PCs using only the phone cable provided with the
HomeLink adapter. Disconnect your PCs from any phone jacks and
remove any telephone, modem, or other device that you have connected
to the HomeLink adapters.
• If the PCs are far away from each other, bring them close to each other
and try connecting them directly together. This test will determine
whether your phone line or your HomeLink hardware is causing your net-
work to malfunction.
• Make sure the other PC is turned on!
• Choose Start, Find, and Computer. Type the name of the computer in
the window that comes up, and click Find Now.
6. I've decided that I don't want to share a drive or printer anymore, or I want
to physically remove a drive or printer from my network.
• You must reconfigure your File and Printer Sharing settings manually. To
do so, double-click on your My Computer icon. Click on the Printers
folder. A window of available printers will appear. Right-click on the
printer that you want to disable on the network. Click on Sharing, fol-
lowed by the Sharing tab. Click on Not Shared. When you're done, click
on the Apply button, followed by OK.
• You can disable shared drives in the same way. In Windows Explorer,
right-click on the drive you want to stop sharing. Click on Sharing, fol-
lowed by the Sharing tab. Click on Not Shared. When you're done, click
on the Apply button, followed by OK.
7. In Network Neighborhood, you can only see computers running the same
operating system as your PC. For example, if you are running Windows 98, you
can only see other Windows 98 PCs and no PCs running Windows 95.
• Click Start, Find, then Computer and type the name of any other com-
puter in the window that comes up. Click Find Now.
• Make sure that you are using the same protocols and workgroup names
on the computers. To do this, click on Start, Settings, Control Panel,
then double-click on the Network icon. Click on the Configuration tab
and verify your protocol settings. If any protocols are missing, add any
needed protocol(s) using the Add button in the Network window. Next,
click on the Identification tab for Workgroup settings. Make sure they
are consistent with your other PCs.
• If all computers are using the same protocol(s) and Workgroup name, and
Windows 95 computers can't see Windows 98 computers, enable
NetBIOS on all the computers using Windows 95 and 98.
• IPX/SPX-compatible protocol should be installed on all computers.
• Bring up the properties of the IPX/SPX-compatible protocol. To do so,
23