Chapter 9: Using The Eg1032 Instant Gigabit Network Adapter Diagnostic Utility; Overview; Installing The Diagnostic Utility; Figure 9-1: Select Windows Operating System - Linksys EG1032 User Manual

10/100/1000 gigabit network adapter

Hide thumbs Also See for EG1032:

Table of Contents

10/100/1000 Gigabit Network Adapter

Chapter 9: Using the EG1032 Instant Gigabit Network Adapter

Diagnostic Utility

Follow the instructions in this chapter to install and use the Diagnostic Utility.

1. Power on your computer.

2. Insert the Setup CD into your computer's CD-ROM drive. After a few seconds, a screen will appear, showing

the Utility's files. Select LinksysDiag_98_ME.exe if you are running Windows 98 or Window Me. Select

LinksysDiag_2k_XP if you are running Windows 2000 or Windows XP.

If this screen does not automatically appear after a few seconds, select Run from the Start menu and enter

d:\winutility in the field (if "D" is the letter of your CD-Rom drive).

3. The Welcome screen will appear to begin installing the Utility. To continue with the installation, click the Next

button. To close the installation program, click the Cancel button.

Chapter 9: Using the EG1032 Instant Gigabit Network Adapter Diagnostic Utility

Overview

Table of Contents

Eg1032 v3