Linksys USB200HA User Manual page 10

8. Click on the Identification tab. Type your Computer Name in the
Computer Name field. Make sure you choose a name that is unique from
the other computer names on the network, e.g., Dad, Upstairs_PC, etc.
N N o o t t e e : : Your C C o o m m p p u u t t e e r r N N a a m m e e and W W o o r r k k g g r r o o u u p p N N a a m m e e must both be less than
15 characters, and must only consist of numbers and letters. Every
C C o o m m p p u u t t e e r r N N a a m m e e for each PC on the network must be different from all the
other PCs' Computer Names on the network.
9. Type your Workgroup Name in the Workgroup field. The Workgroup
name must be the same Workgroup Name used by all the other PCs on
the network. Do not click OK when you are done.
14
Linksys HomeLink™ Series Phoneline 10M USB Network Adapter
10. Optional: Enter a description of your computer in the Computer
Description field. You may leave this field blank if you wish.
11. Optional: Choose the Access Control tab. Make sure that Shared-level
access control is selected. If the setting is on User-level access control
and you can't change it, see Troubleshooting problem 4 on page 22.
12. Click OK. Your PC may ask for your Windows 98 CD-ROM or the loca-
tion of the Windows 98 installation files. If it does, direct Windows to the
appropriate location, e.g., D:\win98 if you have the Windows 98 CD-
ROM, or C:\windows\options\cabs if you don't.
13. Once Windows has copied those files, the System Settings Change win-
dow appears. Remove your driver disk from the floppy drive and click
Yes to restart your PC. If you don't see this window, click on your Start
button, then choose Shut Down, select Restart, and click OK to restart
your PC.
15