Standby/Hibernation Functions - Panasonic CF-37 Series Reference Manual

Standby/Hibernation Functions

Starting Up Your Computer Quickly
If you want to immediately start up and continue an application after shutting down your
computer, you can do so by using the standby or hibernation function.
Differences between the standby and hibernation functions
Function Standby function
Where data is saved to Memory
Speed Fast
Requires power supply Yes
Setting the Standby or Hibernation Function
Windows NT
[Off] is factory set.
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
press Enter
5
Press F10 , then select [Yes]
NOTE
The Standby or Hibernation function can be set even with [Panel Switch] in the
Setup Utility. page 55
Windows 2000
1
Select [Start] - [Settings] - [Control Panel] - [Power Options],
in [Hibernate] add the check mark for [Enable hibernate Sup-
port], then select [Apply]
2
In [Advanced], select [Standby] or [Hibernate] for [When I press
the power button on my computer], then select [OK]
NOTE
The operation of the power switch and the operation of the computer when the
LCD is closed can be set in [Advanced].
(if power is cut, all data is lost)
( page 51)
, select [Power]
, select [Power Switch] and press Enter
, select [Suspend] or [Hibernation] and
Hibernation function
Hard disk
Somewhat slow
Power not required to maintain data
14