Application Software - Panasonic CF-37 Series Reference Manual

Dealing with Problems
Character Input
Only capital letters are
being input
How to input European
characters (ß, à, ç),
symbols or Euro Cur-
rency Symbol is unclear
When NumLock is acti-
vated, the password can-
not be input if a key for
the password is one of
the keys for the ten-key
function
Setup Utility
[Enter Password] is dis-
played
[Advanced] menu can not
be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work
[Hard Disk Lock] is not
displayed

Application Software

Computer hangs
Sound
The sound is not heard
The volume can not be
changed by pressing
Fn + F5 or Fn + F6
Unusual Sound
The computer produces
a strange sound
If CapsLock is on, the Caps Lock function is ON. To switch it OFF, press
Caps Lock .
Windows NT
Select [Start] - [Programs] - [Accessories] - [Character Map]. The Character Map will
be displayed. Point to the desired font name and select it.
Windows 2000
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map]. The
Character Map will be displayed. Point to the desired font name and select it.
Turn NumLock OFF.
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
The internal battery maintaining the clock may need to be replaced. Contact Panasonic
Technical Support.
Press Ctrl + Alt + Del
After cutting the power by pressing the power switch for more than four seconds,
slide the power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel]
- [Add/Remove Programs] to delete the program. Then try installing the program
once again.
Try changing the mute by pressing Fn + F4 .
Has the Setup Utility been used to set [Speaker] to [Disable]? (
Under the condition the sound function of Windows is not working,
played, but the volume does not change.
If the computer enters the condition the power of the display is OFF (for energy
conservation purposes) or the LCD is closed while the computer is making a sound,
the computer may produce a strange sound, but this does not indicate a problem.
If the computer has not been used for a long period of time, it may produce an
unusual sound at start up. The sound may continue for a short period of time, but
if the computer starts up in a normal manner, then the problem is not serious. If,
however, the computer fails to start up, contact Panasonic Technical Support.
(Advanced)
to reboot the computer.
66
page 52)
or is dis-