Turning On The Dog Collar Device; Turning Off The Device; Dog Collar Device; Pairing A Dog Collar Device With The Handheld Device - Garmin Sport PRO Owner's Manual

Turning On the Dog Collar
Device
• To turn on the dog collar device in
training mode, hold the power key until
the status LED turns green and the
collar beeps.
• To turn on the dog collar device in
independent BarkLimiter mode, hold
the power key until the status LED
turns blue (page 9).
• To turn on the dog collar device in
pairing mode, hold the power key until
the status LED turns yellow
(page 4).

Turning Off the Device

1
On the dog collar device, hold the
power key until the status LED turns
red.
2
Release the power key.
The dog collar device beeps to confirm
powering off.
NOTE: If the device is powered off in
BarkLimiter mode, the LED flashes the
number of corrected barks before
powering off (page 10).
4

Dog Collar Device

You can use up to 3 dog collar devices
with a single handheld device.
Each dog collar device must be paired
with the handheld device before it can be
used. During the pairing process, each
dog collar device is associated with a
different color on the handheld device.
Pairing a Dog Collar Device with
the Handheld Device
NOTE: If your handheld device and dog
collar device were included in the same
package, the devices are paired from the
factory.
1
On the handheld device, move the
toggle switch to choose the color
associated with the dog collar device.
2
On the handheld device, set the
intensity level to a numbered position.
3
On the dog collar device, hold the
power key for about 5 seconds until
the status LED turns yellow.
4
While the dog collar device status LED
is yellow, select a training key on the
handheld device.
The dog collar device beeps when the
devices have paired successfully.
Getting Started