NordicTrack Commercial 2950 NTL22113.0 User Manual page 12

5. Identify the #8 x 3/4" Screws (5). IMPORTANT:
Do not confuse the #8 x 3/4" Screws with the
#8 x 3/4" Truss Head Screws (24). The #8 x
3/4" Truss Head Screws have flatter heads.
Attach the Tray (79) to the left and right Tray
Brackets (76) with four #8 x 3/4" Screws (5).
Start all four Screws, and then tighten them.
Make sure that no wires are pinched.
6. Connect the two fan wires. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Insert the connectors through the looped tie as
shown. Then, pull the tie tight and cut off the
excess tie.
7. Attach the two Handrails (74) to the Uprights
(84) with two 5/16" x 3 1/4" Screws (88) and two
5/16" Star Washers (8). Do not fully tighten
the Screws yet. Be careful not to pinch the
Upright Wire (83) or the fan wire (A). Position
the wires in the cutouts as shown.
Then, remove and discard the two indicated
screws (D).
5
76
5
6
Bottom
View
7
88
8
D
84
12
79
76
5
Front View
Wires
Tie
74
A
88
8
83
84
74
D