Setting Up The Tuner; Selecting A Channel Source; Finding Channels - Vizio E65-C3 User Manual

SETTING UP THE TUNER

You can use the TV's Tuner menu to:
• Select a channel source
VIZIO
• Find channels
CHANNELS
• Perform a partial channel scan
Channel Source
• Manually add channels
Find Channels
Partial Channel Search
• Select channels to skip
Add Analog Channel
• Select the language for
Skip Channel
the audio from analog and
Analog Audio
digital channels.
Digital Language

Selecting a Channel Source

Select the source of your
Antenna (Over-the-air) or Cable (Out-of-the-wall).
1. On the remote control, press INPUT and use the Arrow
buttons to highlight TV (antenna icon), then press OK.
2. Press the MENU button, select Channels and press OK. The Wide Zoom Normal Panoramic
Cable
CHANNELS menu is displayed.
3. On the CHANNELS menu, highlight Channel Source and
using the Left/Right Arrow buttons to select either Antenna
Exit 2D 3D
or Cable.
Stereo
English
ABC
Input Wide CC
Sleep
Picture Audio
Timer
Network Settings Help

Finding Channels

television signal: either The TV may need to scan for channels before it can display
programs and their associated information. A channel scan is
required for free over-the-air channels (using an antenna) and
cable channels from an out-of-the-wall connection (without a
cable box). Moving the TV to an area with different channels
requires the TV to scan for channels again.
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
highlight Find Channels, and
press OK. The channel scan
begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
4
VIZIO
FIND CHANNELS
Wide Zoo
Channels Found
Digital: 0
Analog: 0
13% Complete
Exit 2D
Cancel
Input W
Sleep
Pic
Timer
Cancel the channel scan.
Network Set
36