Changing The Tv Settings; Changing The Input Source; Setting The Tuner Mode; Scanning For Channels - Vizio E390V User Manual

chaNgiNg the tv SettiNgS

Using the settings menu, you can:
• Change the input source
• Set up the TV tuner
• Name the TV inputs
• Set up parental controls
• Change the on-screen
menu language
• Set the time
• Adjust the CEC settings

Changing the Input Source

To quickly access the Input Source menu, press the
INPUT button on the remote.
To change the input source from the Settings menu:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the Settings
icon and press OK. The Settings menu is displayed.
3. Highlight Input Source and press OK. The Input Source menu
is displayed.
4. Highlight the input source you want to display and press OK.

Setting the Tuner Mode

If you are using a device that is connected to the RF input, such
as an external antenna or cable TV connection, you must set the
tuner mode.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
3. Highlight Tuner and press OK. The Tuner Mode menu is
displayed.
4. Highlight Antenna or Cable and press OK.
5. Press the EXIT button on the remote.

Scanning for Channels

Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
1. From the Tuner Settings menu,
highlight Auto Channel Scan.
The auto channel scan begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
24
5