Using The Network Connection Menu; Connecting To A Wireless Network; Changing The Manual Setup Settings; Finding Mac Addresses For Network Setup - Vizio E65-C3 User Manual

USING THE NETWORK CONNECTION MENU

Your TV is Internet-ready, featuring both an Ethernet port and
built-in high-speed Wireless-N.

Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is
being broadcast:
If your TV is connected to a network with an
Ethernet cable, you will not see the wireless network
connection menu. You must disconnect the Ethernet
cable to set up a wireless network connection.
1. Press the MENU button on the
remote. The on-screen menu is
VIZIO
displayed.
NETWORK
2. Use the Arrow buttons on the
Wired Connection
remote to highlight Network
Wireless Access Points
and press OK. The NETWORK
menu is displayed.
3. If you do not see your wireless
network displayed, highlight
More Access Points
More Access Points and press
WPS
OK. The WIRELESS ACCESS
Manual Setup
POINTS menu, which is a list of
Hidden Network
available wireless networks, is
Test Connection
displayed.
4. Highlight the name of your
wireless network (this is the
network's SSID) and press OK.
5. Using the on-screen keyboard,
enter your network's password,
then highlight Connect and
press OK.
6. Press the EXIT button on the remote.

Changing the Manual Setup Settings

Advanced users can fine-tune the network settings using the
Manual Setup feature.
To change advanced network settings:
1. From the NETWORK menu,
highlight Manual Setup and
press OK. The MANUAL SETUP
menu is displayed.
2. To change the settings
manually, use the Arrow
buttons on the remote to
highlight DHCP and then use
the Left/Right Arrow buttons to
change the setting to Off.
3. Use the Arrow and OK buttons
to adjust each setting:
Wide Zoom Normal Panoramic
Disconnected
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet
mask.
Exit 2D 3D
• Default Gateway - Your
network's default gateway
ABC
address.
• Pref. DNS Server - Your
Input Wide CC
preferred domain name
server address.
• Alt. DNS Server - Your alternate domain name server
Sleep
Picture Audio
address.
Timer
4. Use the Arrow buttons on the remote to highlight Save and
press OK.
Network Settings Help
5. Press the EXIT button on the remote.

Finding MAC Addresses for Network Setup

The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
To find the TV's MAC address:
1. From the NETWORK menu, highlight Manual Setup and press
VIZIO
OK. The MANUAL SETUP menu is displayed.
MANUAL SETUP
2. Find the MAC address for the TV at the bottom of the list. The
Wide Zoom
DHCP Off
MAC addresses for the connections in use are displayed:
IP Address ____.____.____.____
• RJ45 MAC - The Ethernet or RJ45 MAC address may
Subnet Mask ____.____.____.____
be needed to set up your network when you have
Default
connected the TV to your network with an Ethernet (Cat
Exit 2D
Gateway ____.____.____.____
5) cable.
Pref. DNS
Server ____.____.____.____
• Wireless MAC - The Wireless (WiFi) MAC address may be
Alt. DNS
needed to connect your TV to your network with WiFi.
Server ____.____.____.____
MAC 0:0:0:0:0:0 Input Wide
Save
Cancel
Sleep
Picture
Timer
Network Settings
Normal Panoramic
3D
ABC
CC
Audio
Help
4
34