Setting Up The Tuner; Selecting A Tuner Input; Scanning For Channels - Vizio E420-B1 User Manual

Setting uP the tuneR

You can use the TV's Tuner menu to:
• Select a Tuner Input
• Perform an Auto Channel Scan
• Perform a Partial Channel Scan
• Manually Add Channels
• Select Channels to Skip
• Select Analog MTS Modes
• Select Digital Languages
VIZIO
TUNER
Tuner Mode Antenna
Auto Channel Scan
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio Stereo
Digital Language English
28

selecting a Tuner input

Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the TUNER menu, highlight Tuner mode and press ok.
The TUNER MODE menu displays.
2. Highlight antenna or Cable and press ok. Press exiT.
Wide Zoom Normal Panoramic

scanning for Channels

Before the TV can detect and display channels and their
Exit 2D 3D
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
ABC
available.
Input Wide CC
To perform an Auto Channel Scan:
1. From the TUNER menu, highlight
auto Channel scan, and press
Sleep
ok. The CHANNEL SCAN begins.
Picture Audio
Timer
2. Wait until the channel scan is
100% complete. Highlight done
and press ok.
Network Settings Help
3. Press the exiT button on the
remote.
If the channel scan is cancelled,the
channels that were
discovered are retained. A new
channel scan will clear all channels.
VIZIO
CHANNEL SCAN
Channels Found
Digital Channels: 0
Analog Channels: 0
13% Complete
Cancel
already
Cancel the channel scan.
5