Setting Up The Tuner; Selecting A Tuner Input; Scanning For Channels - Vizio E320i-B2 User Manual

SETTING UP THE TUNER

You can use the TV's Tuner menu to:
• Select a Tuner Input
• Perform an Auto Channel Scan
• Perform a Partial Channel Scan
• Manually Add Channels
• Select channels to skip
• Select Analog MTS modes
• Select Digital Languages
VIZIO
TUNER
Tuner Mode Cable
Auto Channel Scan
Partial Channel Scan
Add Analog Channel
Skip Channel
Analog Audio Stereo
Digital Language English
37

Selecting a Tuner Input

Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the TUNER menu, highlight Tuner Mode and press OK.
The TUNER MODE menu displays.
2. Highlight Antenna or Cable and press OK. Press EXIT. Wide Zoom Normal Panoramic

Scanning for Channels

The TV may need to scan for channels before it can display
Exit 2D 3D
programs and their associated information. A channel scan is
required for free over-the-air channels (using an antenna) and
cable channels from an out-of-the-wall connection (without a
ABC
cable box). Moving the TV to an area with different channels
requires the TV to scan for channels again.
Input Wide CC
To perform an Auto Channel Scan:
1. From the TUNER menu, highlight
Sleep
Auto Channel Scan, and press
Picture Audio
Timer
OK. The auto channel scan
begins.
2. Wait until the channel scan is
Network Settings Help
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
5
VIZIO
VIZIO
CHANNEL SCAN
Channels Found
Digital: 0
Analog: 19
18% Complete
Cancel
Cancel the channel scan.