Disassembly Method - JVC KD-SX979R Service Manual

Disassembly method

Removing the front panel unit (See Fig. 1, 2)
1.Press the Eject button to open the front panel unit
2.Push and open the right and left open/close shaft arms
outward to remove the shaft.
3.Remove the front panel unit from the same side as the
shaft was removed.
Removing the front chassis assembly (See Fig. 3, 4)
1.Remove the front panel unit.
2.Remove the two screws A attaching the front chassis
assembly.
3.Remove the four ribs a attaching the front chassis
assembly to the chassis.
Fig 3
Removing the bottom cover assembly
(See Fig. 5)
Turn the unit upside down,then insert and turn to
b the screwdriver to remove the bottom cover.
A
a
Front panel unit
Fig 2
Fig 4
b
b
Fig 5
KD-SX979R/KD-SX925R
KD-SX924R/KD-SX909R
Eject button
Fig 1
Open/close
shaft arm
a
b
2-1