Troubleshooting - JVC KD-X320BT Instruction Manual

MORE INFORMATION
About JVC Playlist Creator and JVC Music Control
• This unit supports the PC application JVC Playlist Creator and Android
Control.
• When you play audio file with song data added using the JVC Playlist Creator or JVC Music
Control, you can search for audio file by Genres, Artists, Albums, Playlists, and Songs.
• JVC Playlist Creator and JVC Music Control are available from the following web site:
<http://www.jvc.net/cs/car/>.
Change the display information
Press repeatedly.
FM/AM/SW1/SW2 Station name (PS)*
1 2
Title* * Day/Clock
*
1
For FM Radio Data System stations only.
*
2
If unavailable, "NO PTY" / "NO TEXT" appears.
USB Playing time
Folder/file name
*
3
If not recorded, "NO NAME" appears.
USB-IPOD Playing time
USB-ANDROID (back to the beginning)
*
4
If not recorded, "NO NAME" appears.
PANDORA Station name
Day/Clock (back to the beginning)
IHEART Station name
to the beginning)
* 5
If unavailable, station name appears.
AUX AUX Day/Clock
BT AUDIO Playing time
(back to the beginning)
* 6
If not recorded, "UNKNOWN" appears.
TM application JVC Music
1
Frequency Program type (PTY)*
(back to the beginning)
3
Day/Clock Album title/Artist* Track title*
(back to the beginning)
4
Day/Clock Album title/Artist* Track title*
Album title/Artist Track title Playing time
5 5
Track title* Track Artist* Day/Clock
6
Day/Clock Album title/Artist* Track title*

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
1 2
*
• Radio reception is poor.
• Static noise while listening
to the radio.
3 Playback order is not as
intended.
Elapsed playing time is not
correct.
4
"NOT SUPPORT" appears and
file skips.
"READING" keeps flashing.
(back "CANNOT PLAY" flashes and/
or connected device cannot
be detected.
The iPod/iPhone does not
6
turn on or does not work.
Correct characters are not
displayed.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SRC SELECT] setting. ( 4)
• Connect the antenna firmly.
• Pull the antenna out all the way.
The playback order is determined by the file name
(USB).
This depends on the recording process earlier.
Check whether the file is a playable format. ( 20)
• Do not use too many hierarchical levels and folders.
• Reattach the USB device.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 20)
• Reattach the device.
• Check the connection between this unit and iPod/
iPhone.
• Detach and reset the iPod/iPhone using hard reset.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
ENGLISH
21