Changing Capsule Systems - Sunbeam Multi-Capsule CM2000 Instruction Booklet

Changing the capsule system
Changing the Capsule System
1. Open the handle. See figure 1.
2. Rotate the capsule holder anti-clockwise
(towards the unlock position). See figure 2.
3. Lift the capsule holder out of the machine.
See figure 3.
4. Select the colour coded capsule holder that
you would like to use.
5. Align the capsule holder with the cradle
using the arrow, guideline and unlock
symbol as a guide.
6. Push capsule holder firmly into the cradle.
See figure 4.
Figure 1
7. Rotate the capsule holder clockwise
(towards the lock position) until you hear
and feel it click into the locked position.
See figure 5.
WARNING: Make sure the capsule holder is in
the "LOCK" position before closing. The handle
will not close if the capsule holder is not
locked in place.
Figure 2
8. Close the handle.
Figure 3
Figure 4
Figure 5
7