Firmware Command - Planet Networking & Communication IGSW-24040T User Manual

6.17 Firmware Command

Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load <ip_addr_string> <file_name>
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
: Firmware file name
<file_name>
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load <ipv6_server> <file_name>
Parameters:
<ipv6_server>: TFTP server IPv6 address
467
User's Manual of IGSW-24040T