Lubricant Specifications - Lincoln 2004 LS Owner's Manual

2
Add the coolant type originally equipped in your vehicle.
3
Your vehicle's rear axle is filled with a synthetic rear axle lubricant and
is considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water. Fill 6
mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
4
Ensure the correct automatic transmission fluid is used. MERCON and
MERCON V are not interchangeable. DO NOT MIX MERCON and
MERCON V. Refer to the Scheduled Maintenace Guide to determine
the correct service interval.
5
Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by a qualified service technician.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C153–H and the API Certification mark.

LUBRICANT SPECIFICATIONS

Item Ford part
name
Brake fluid Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
Door Silicone
weatherstrips Lubricant
Door latch, Multi-Purpose
hood latch, Grease
auxiliary hood
latch, door
hinges, striker
plates, seat
tracks and fuel
filler door hinge
2004 Lincoln LS (dew)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
Ford part
number
PM-1
1
XL-6
XG-4 or XL-5
Ford
specification
ESA-M6C25-A
and DOT 3
ESR-M13P4-A
ESR-M1C159-A
or
ESB-M1C93–B
301