System Utilities; Ppn 72; Unit Number - Linear AE-500 Facility Manager’s Manual

System Utilities

Several utility commands are available for the system. Utilities can be used to clear
memory, display system information, and control the relays.
Display Unit Number
In multi-unit installations the unit number of each AE-500 can be displayed.
1. If not already in Programming Mode, use the local keypad to enter the
master password and access programming.
2. Press
3. The display will show the unit number for three seconds.
4. Exit Programming Mode if all programming is complete.
Display System Firmware Version
The version of the fi rmware installed in the system can be displayed.
1. If not already in Programming Mode, use the local keypad to enter the
master password and access programming.
2. Press
3. The display will show the fi rmware version.
4. Exit Programming Mode if all programming is complete.
Manual Control of the Relays
For servicing or testing, each relay output can be controlled manually from the
local keypad while in Programming Mode.
1. If not already in Programming Mode, use the local keypad to enter the
master password and access programming.
2. Enter a command to control a relay:
• Press to latch Relay Channel "A".
• Press to latch Relay Channel "B".
• Press to release Relay Channel "A".
• Press to release Relay Channel "B".
3. The display will show the unit number for three seconds.
4. Exit Programming Mode if all programming is complete.
Deleting Database Entries
Sections of the database can be deleted individually. Exercise care when using
these commands, their effect cannot be reversed.
1. If not already in Programming Mode, connect by telephone or use the
local keypad. Enter the master password and access programming.
2. Enter a command to delete database sections:
• To delete all resident data:
• To delete all entry codes press:
• To delete all wireless transmitters press:
3. Exit Programming Mode if all programming is complete.
14
DISPLAY UNIT NUMBER
72#
DISPLAY SYSTEM FIRMWARE VERSION
73#
LATCH RELAY CHANNEL "A"
81#
LATCH RELAY CHANNEL "B"
82#
RELEASE RELAY CHANNEL "A"
83#
RELEASE RELAY CHANNEL "B"
84#
DELETE ALL RESIDENT DATA
92#000000#000000#
DELETE ALL ENTRY CODES
93#000000#000000#
DELETE ALL WIRELESS TRANSMITTERS
94#000000#000000#

PPN 72

PPN 73
PPN 81
PPN 82
PPN 83
PPN 84
PPN 92
PPN 93
PPN 94