Wiring Diagram - Linear AE-100 Installation And Programming Instructions

Wiring Diagram

BACKUP BATTERY
INTERNAL 1.2 AMP/HOUR P/N 100104
EXTERNAL UP TO 7 AMP/HOUR
ELECTRIC
DOOR STRIKE
DOOR STRIKE
POWER SUPPLY
16 VAC 20 VA
TRANSFORMER
CONNECT TO MODEL CCM-1 CAMERA
TO DEDICATED
TELEPHONE LINE
CONNECT TELEPHONE LINE TO
TERMINALS OR TELEPHONE JACK
1. FOR POWER TRANSFORMER WIRE RUNS UP TO 100 FEET USE 18 AWG, THHN 600-VOLT INSULATED WIRE
2. FOR POWER TRANSFORMER WIRE RUNS UP TO 200 FEET USE 16 AWG, THHN 600-VOLT INSULATED WIRE
3. DO NOT ROUTE THE TELEPHONE AND AC WIRING INSIDE THE SAME CONDUIT!
4. INTERNAL BATTERY CHARGER WILL SUPPORT UP TO A 7 AMP/HOUR BACKUP BATTERY
5. CONNECT THE CASE GROUND STUD TO A GOOD QUALITY EARTH GROUND WITH 12 AWG SOLID WIRE
6. DO NOT USE THE AE-100 TRANSFORMER TO POWER THE DOOR STRIKE!
EARTH
GROUND
STAKE
12 VOLT
BATTERY
ACCESS RELAY
10 AMPS @ 30 VOLTS AC
7 AMPS @ 30 VOLTS DC
MAXIMUM
TO VIDEO
MONITOR OR
MODULATOR
DISPLAY
CONTRAST
CAMERA
CONNECTOR
TELEPHONE
JACK
TELEPHONE
TERMINALS
WIRING NOTES
CASE
GROUND
AE-100 CIRCUIT BOARD
STUD
EARTH GROUND
BACKUP BATTERY
TTY JACK
SPEAKER
VIDEO OUT
POSTAL LOCK
N.O.
COM ACCESS RELAY
N.C.
16 VAC INPUT
MAIN
POWER
SWITCH
ON OFF
SPEAKERPHONE
SYSTEM
RESTART
BUTTON
PHONE
POWER
DIGITAL
SPEECH
VOLUME
VOLUME
MICROPHONE
BATTERY
STATUS RELAY
5