Disassembly Procedure; Lower Case Assembly - Yamaha P-85 Service Manual

P-85/P-85S

DISASSEMBLY PROCEDURE

Caution:
1. Be sure to attach the removed fi lament tape just
as it was before removal.
2. Pay attention not to insert and install the cable
to the connector inversely. (Photo 1)
1.

Lower Case Assembly

(Time required: About 10 minutes)
1-1 Remove the four (4) screws marked [37]. The FFC
cover can then be removed. (Fig. 1)
1-2 Disconnect the connectors CN301 and CN602 on
the DM circuit board. (Photo 2)
1-3 Remove the fifty-seven (57) screws marked
[33] and the screw marked [34]. The lower case
assembly can then be removed. (Fig. 1)
<Bottom view>
[33] [34]
[33]
[33]
[33]
[33]
6
Front Side (Printed Side)
[33] [33]
[33] [33]
Lower case assembly
Back Side
[33] [33]
[37] FFC Cover
Fig. 1
Photo 1
DM
CN602 CN602 CN301 CN301
Photo 2
[33] [33]
[33] [33]
[33]
[33]
[33]
[33]