Easily Create A Cd In Three Steps - Roland CD-2e Manual Book

Easily create a CD in three steps

Select
[Write (SD→CD)].
Once the recording is complete, it is time to burn
the data onto the CD. Press the [MENU] button
to display the menu. Select [Write (SD→CD)] with
the [ ] [ ] keys. Select the audio data to be
burned onto the CD.
Insert the CD-R/RW
into the CD Drive
Insert the CD-R/RW disc into the CD slot located
on the right-hand side of the CD-2e. Then select
whether all of the audio data or only specifi c
selections from the SD memory card are to be
recorded.
Follow the Onscreen
Instructions and Press
[ENTER]
Select [Finalize: Yes*], then press the [ENTER]
button to commence recording the data onto
the CD. This procedure will require between
four and fi ve minutes. Once it has fi nished, your
original audio CD is complete!
* See [One-Point Advice] on this page for further details.
One-Point Advice
Finalization
This process is the fi nal step in creating a CD-R/RW, and
it entails writing such information as song numbers,
total song count, and length of performance, etc., onto
the disc. The fi nalization process ensures that the audio
data recorded with the CD-2e can be played back on
conventional CD players as a standard audio CD.
(Quick Start: Step 2), (Owner's Manual: Page 79)
7