Easily Create A Cd In Three Steps - Roland CD-2e Manual Book

Easily create a CD in three steps

Check the recording through
the onboard speakers
Press the [PLAY] button to listen to the recorded
performance. If you're satisfi ed with the record-
ing, you're done at this point. If you decide to
re-record, or if you want to record an additional
song, repeat steps 1–3 on the page at left.
Complete the process
by "fi nalizing" the CD
"Finalizing" is the process that makes a recorded
CD-R/RW disc playable on a conventional CD
player. When you press the [EJECT] button, a mes-
sage asking "Finalize Are You Sure?" will appear.
Press the [ENTER] button to carry out the Finalize
operation.
Your original CD is ready!
Finalization will take approximately two minutes.
When the process is completed, the CD will be
ejected from the slot on the right side of the CD-
2e. Your original CD is ready. Creating a CD is as
simple as that.
Taking advantage of an SD memory card
The CD-2e lets you record on SD memory cards as well as on
CD-R/RW discs. If you use an SD memory card, you'll be able
to freely organize and edit the songs. By taking advantage
of SD memory cards you can enjoy recording and creating
CDs in a variety of ways.
7