Error Codes; Catastrophic Errors - Lexmark 6300 Series Service Manual

4416-XXX

Error codes

Catastrophic errors

In this state, the All-In-One is in an error mode such that operation cannot
continue. These errors affect the entire All-In-One. The LCD is on and
operating. An error message is displayed on the LCD. The All-In-One
accepts data, but discards it and does not respond.
Catastrophic error list
Code Name
0000 NVRAM R/W
0001 Memory
Failure
2-2
Service Manual
Description
There was an error
detected in reading or
writing NVRAM.
Unable to initialize
memory
Action
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
clean the NVRAM by
pressing the Up
Arrow button and
Menu button
simultaneously. The
Self Test menu
appears; select Clean
NVRAM. If the error
continues, replace the
system board.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
clean the NVRAM by
pressing the Up
Arrow button and
Menu button
simultaneously. The
Self Test menu
appears; select Clean
NVRAM. If the error
continues, replace the
system board.