Operation; Basic Functions; Audio Menu; Radio Mode - Jensen MS3A Owner's Manual

OPERATION

Basic Functions

Power
Press the JENSEN power button (1) to turn the unit on/off.
Restore Factory Settings
Perform the following steps to reset the radio to factory default settings:
1. Press and hold the power button (1) to display the software version.
Press the VOL + button (3) to display "RESET".
2.
3. Press the power button to confirm factory default restore. After reset, the unit will default to FM mode.
Volume
Press the VOL + button (3) to increase the volume.
Press the VOL - button (2) to decrease the volume.
Press and hold either button to change the volume level quickly.
Mute
Press the MUTE button (9) to silence the audio output in tuner, AUX or USB mode. Press again to restore the previous volume
level.
Mode
Press the MODE button (8) to select a mode of operation: FM, AM, AUX, USB and Bluetooth.

Audio Menu

Press and hold the MODE button (8) to access the audio menu. Press the MODE button repeatedly to adjust the following
settings: BASS, TREBLE, BALANCE, FADER, AS and PS. Use the VOL +/- buttons (3, 2) to choose a value for each setting.
See "Radio Mode" for instructions regarding the Auto Store (AS) and Preset Scan (PS) features.

Radio Mode

USA/Europe (EURO) Tuning Mode Selection
To change from USA to European tuning mode, perform the following steps:
1. Press and hold the MODE button (8) for 2 seconds to access the system menu.
2. Press the MODE button repeatedly to move through the menu options (BASS > TREBLE > BALANCE > FADER > AS/PS
> USA/EURO). The unit will display USA (if set to USA frequency tuning mode) or EURO (if set to European frequency
mode).
3. With the display showing the current tuning mode, press the VOL - or VOL+ button (2, 3) to change between USA/EURO.
4. Press the JENSEN power button (1) to confirm your selection.
8
MS3A