Troubleshooting - Jensen MS3A Owner's Manual

TROUBLESHOOTING

Problem
No power
No AM/FM Reception
No sound
Table 1: Troubleshooting
If the power supply is connected to the vehicle accessory circuits but the engine is not on, switch
the ignition key to "ACC"
Fuse may be blown. Replace with 10AMP ATO fuse.
Antenna cable not connected; insert antenna cable firmly.
Check volume level; increase volume if necessary.
Check power; make sure device is on.
Check device; press the play/pause button to ensure unit is not in Pause mode.
Solution
13
MS3A