Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Straight - Canon iPF8400 Basic Manual

Roll paper cannot be inserted into the paper feed slot

7
If the Carriage is on the left, move the Carriage to
the right until it stops.
Important
8
Lower the Release Lever and close the Top Cover.
9
Turn the printer on. (See "Turning the Printer On and Off.")
Roll paper cannot be inserted into the paper feed slot Roll paper cannot be inserted into the paper feed slot
Cause
The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.

Paper is not cut straight

Paper is not cut straight
108
The paper is bent or curled at the cut position.
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you
turn on the printer.
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Press the Load button and select the paper source.
Press the Load button and select the paper source.
Cause
→
User's Guide
Corrective Action
→
P.102
→
P.105
Corrective Action
Straighten out any curling by the edges of the paper.
Corrective Action
iPF8400
Basic Guide