D-Link DCS-4602EV User Manual page 32

Section 3: Configuration
Exposure Mode:
Denoise:
Brightness:
Contrast:
Saturation:
Sharpness:
WDR Level:
3D Filter:
Reset Default:
D-Link DCS-4602EV User Manual
Changes the exposure mode. Use the drop-down
box to set the camera for Indoor, Outdoor, or Night
environments, or to Moving to capture moving objects.
The Low Noise option will focus on creating a high-
quality picture without noise. You can also create 3
different custom exposure modes. The Max Gain setting
will allow you to control the maximum amount of gain
to apply to brighten the picture.
This setting controls the amount of noise reduction that
will be applied to the picture.
Adjust this setting to compensate for backlit subjects.
Adjust this setting to alter the color intensity/strength.
This setting controls the amount of coloration, from
grayscale to fully saturated.
Specify a value from 0 to 8 to specify how much
sharpening to apply to the image.
WDR makes it easier to see objects that may appear dark
due to strong backlighting conditions during the daytime.
Higher WDR levels will make it easier to see objects in
shadows.
3D filtering reduces the amount of image noise when
viewing a low-light environment. Higher levels of 3D
filtering will apply stronger levels of noise reduction.
Click this button to reset the image to factory default
settings.
32