D-Link DCS-4602EV User Manual page 29

Vigilance full hd outdoor vandal-proof poe dome camera

Hide thumbs Also See for DCS-4602EV:

Table of Contents

Section 3: Configuration

Enable QoS:

Enabling QoS allows you to specify a traffic priority

policy to ensure a consistent Quality of Service during

busy periods. If the Network Camera is connected to a

router that itself implements QoS, the router's settings

will override the QoS settings of the camera.

Enable IPv6:

Enabling this setting will enable use of the IPv6 protocol.

Click the IPv6 Information button to see the camera's

current IPv6 details, or you can check Manually setup

the IP address to manually set up the IP address, specify

a default router, and set the primary DNS.

Enable Multicast for stream:

The DCS-4602EV allows you to multicast each of the

available streams via group address and specify the TTL

value for each stream. Enter the port and TTL settings

you wish to use if you do not want to use the defaults.

Enable Bonjour:

Enable this to allow other network devices to connect to

this camera using Bonjour.

Bonjour Name:

Enter the name to identify this camera on Bonjour.

D-Link DCS-4602EV User Manual

Table of Contents

Show Quick Links

Table of Contents