Connect The Telephone Cord - Uniden XDECT SSE25 Series Owner's Manual

8) Place a handset in the base and any accessory handset(s) in the

Connect the Telephone Cord

Use the telephone
cord to connect the
jack to a
TEL LINE
standard telephone
wall jack.
Test the connection
1) Pick up the handset from the cradle and press
a dial tone, and the display should say Talk.
If...
you don't hear a dial tone or the
display says Check Tel Line
2) Make a quick test call. (Press
If...
there's a lot of noise or static
3) Test any accessory handsets the same way. If you can't get a dial
tone or the handset display says Unavailable, try moving the handset
closer to the base or resetting it (see page 25).
2
XDECT SSE25 OM.indd 2
charger(s) with the display(s) facing forward. The
light on the base and each charger
CHArGE
should all turn on.
If... Try...
the reseating the handset.
-
CHArGE
light does checking the AC adapter connection.
-
not turn on seeing if the outlet is controlled by a
-
wall switch.
Charge all handsets completely (about 15
hours) before using them.
Try...
checking the connection between
the base and the phone jack.
again to hang up.)
TAlk
Try...
see page 24 for tips on avoiding
interference.
. You should hear
TAlk
23/12/09 11:17:50 AM